Best CCNA Course in Bangalore

COURSE CONTENT/SYLLABUS FOR CCNA COURSE : Duration- 30 Hours

Introduction

• Recognize the purpose and functions of various network devices such as routers, switches, bridges and hubs
• Describe the purpose and basic operation of the protocols in the OSI and TCP/IP models
• Identify the appropriate media, cables, ports, and connectors to connect Cisco network devices to other network devices and hosts in a LAN
• Determine the technology and media access control method for Ethernet networks
• Identify basic switching concepts and the operation of Cisco switches
• Configure and verify initial switch configuration including remote access management 

Basic Networking

• 2.a hostname
• 2.b mgmt IP address
• 2.c IP default-gateway
• 2.d local user and password
• 2.e enable secret password
• 2.f console and VTY logins
• 2.g exec-timeout
• 2.h service password encryption
• 2.i copy run start
• 2.6 Configure and verify VLANs
• 2.8 Identify enhanced switching technologies
• 2.8.a RSTP
• 2.8.b PVSTP
• 2.8.c Etherchannels
• 2.9 Configure and verify PVSTP operation
• 2.9.a Describe root bridge election
• 2.9.b Spanning tree mode

Describe the operation and necessity of using private and public IP addresses for IPv4 addressing

• 3.1 Identify the appropriate IPv6 addressing scheme to satisfy addressing requirements in a LAN/WAN environment
• 3.2 Identify the appropriate IPv4 addressing scheme using VLSM and summarization to satisfy addressing requirements in a LAN/WAN environment.
• 3.3 Describe the technological requirements for running IPv6 in conjunction with IPv4
• 3.4.a dual stack
• 3.5 Describe IPv6 addresses
• 3.5.a global unicast
• 3.5.b multicast
• 3.5.c link local
• 3.5.d unique local
• 3.5.e eui 64
• 3.5.f auto-configuration

Describe basic routing concepts

• 4.1.a packet forwarding
• 4.1.b router lookup process
• 4.1.c Process Switching/Fast Switching/CEF
• 4.2 Configure and verify utilizing the CLI to set basic Router configuration
• 4.2.a hostname
• 4.2.b local user and password
• 4.2.c enable secret password
• 4.2.d console and VTY logins
• 4.2.e exec-timeout
• 4.2.f service password encryption
• 4.2.g Interface IP Address      
  - 4.2.g [i] loopback
• 4.2.h banner
• 4.2.i motd
• 4.2.j copy run start
• 4.3 Configure and verify operation status of a device interface
• 4.3.a Serial
• 4.3.b Ethernet
• 4.4 Verify router configuration and network connectivity using
• 4.4.a ping     â—¦
  -4.4.a [i] extended
• 4.4.b traceroute
• 4.4.c telnet
• 4.4.d SSH
• 4.4.e sh cdp neighbors
• 4.5 Configure and verify routing configuration for a static or default route given specific routing requirements
• 4.6 Differentiate methods of routing and routing protocols
• 4.6.a Static versus Dynamic
• 4.6.b Link state versus Distance Vector
• 4.6.c next hop
• 4.6.d ip routing table
• 4.6.e Passive Interfaces (how they work)
• 4.6.f Admin Distance
• 4.6.g split horizon
• 4.6.h metric
•  4.7 Configure and verify OSPF
• 4.7.a Benefit of single area
• 4.7.b Configure OSPv2
• 4.7.c Configure OSPv3
• 4.7.d Router ID
• 4.7.e Passive Interface
• 4.7.f Discuss multi-area OSPF
• 4.7.g Understand LSA types and purpose
• 4.8 Configure and verify interVLAN routing (Router on a stick)
• 4.8.a sub interfaces
• 4.8.b upstream routing
• 4.8.c encapsulation
• 4.9 Configure SVI interfaces
• 4.10 Manage Cisco IOS Files
• 4.10.a Boot Preferences
• 4.10.b Cisco IOS Images (15)
• 4.10.c Licensing    
• â—¦4.10.c [i] Show license
• â—¦4.10.c [ii] Change license
• 4.11 Configure and verify EIGRP (single AS)
• 4.11.a Feasible Distance/Feasible Successors/Administrative distance
• 4.11.b Feasibility condition
• 4.11.c Metric composition
• 4.11.d Router ID
• 4.11.e auto summary
• 4.11.f Path Selection
• 4.11.g Load Balancing    
• â—¦4.11.g [i] Unequal
• â—¦4.11.g [ii] Equal

Describe basic routing concepts

• 5.1.a packet forwarding
• 5.1.b router lookup process
• 5.1.c Process Switching/Fast Switching/CEF
• 5.2 Configure and verify utilizing the CLI to set basic Router configuration
• 5.2.a hostname
• 5.2.b local user and password
• 5.2.c enable secret password
• 5.2.d console and VTY logins
• 5.2.e exec-timeout
• 5.2.f service password encryption
• 5.2.g Interface IP Address      
• â—¦5.2.g [i] loopback
• 5.2.h banner
• 5.2.i motd
• 5.2.j copy run start
• 5.3 Configure and verify operation status of a device interface
• 5.3.a Serial
• 5.3.b Ethernet
• 5.4 Verify router configuration and network connectivity using
• 5.4.a ping    
• â—¦4.4.a [i] extended
• 5.4.b traceroute
• 5.4.c telnet
• 5.4.d SSH
• 5.4.e sh cdp neighbors
• 5.5 Configure and verify routing configuration for a static or default route given specific routing requirements
• 5.6 Differentiate methods of routing and routing protocols
• 5.6.a Static versus Dynamic
• 5.6.b Link state versus Distance Vector
• 5.6.c next hop
• 5.6.d ip routing table
• 5.6.e Passive Interfaces (how they work)
• 5.6.f Admin Distance
• 5.6.g split horizon
• 5.6.h metric
• 5.7 Configure and verify OSPF
• 5.7.a Benefit of single area
• 5.7.b Configure OSPv2
• 5.7.c Configure OSPv3
• 5.7.d Router ID
• 5.7.e Passive Interface
• 5.7.f Discuss multi-area OSPF
• 5.7.g Understand LSA types and purpose
• 5.8 Configure and verify interVLAN routing (Router on a stick)
• 5.8.a sub interfaces
• 5.8.b upstream routing
• 5.8.c encapsulation
• 5.9 Configure SVI interfaces
• 5.10 Manage Cisco IOS Files
• 5.10.a Boot Preferences
• 5.10.b Cisco IOS Images (15)
• 5.10.c Licensing     â—¦4.10.c [i] Show license
• 5.10.c [ii] Change license
• 5.11 Configure and verify EIGRP (single AS)
• 5.11.a Feasible Distance/Feasible Successors/Administrative distance
• 5.11.b Feasibility condition
• 5.11.c Metric composition
• 5.11.d Router ID
• 5.11.e auto summary
• 5.11.f Path Selection
• 5.11.g Load Balancing
• â—¦4.11.g [i] Unequal
• â—¦4.11.g [ii] Equal

IP Services 

• 6.1 Configure and verify DHCP (IOS Router)
• 6.1.a Configuring router interfaces to use DHCP
• 6.1.b DHCP options (basic overview and functionality)
• 6.1.c Excluded addresses
• 6.1.d Lease time
• 6.2 Describe the types, features, and applications of ACLs
• 6.2.a standard (editing and sequence numbers)
• 6.2.b extended
• 6.2.c named
• 6.2.d numbered
• 6.2.e Log option
• 6.3 Configure and verify ACLs in a network environment
• 6.3.a named
• 6.3.b numbered
• 6.3.c Log option
• 6.4 Identify the basic operation of NAT
• 6.4.a purpose
• 6.4.b pool
• 6.4.c static
• 6.4.d 1 to 1
• 6.4.e overloading
• 6.4.f source addressing
• 6.4.g one way NAT
• 6.5 Configure and verify NAT for given network requirements
• 6.6 Configure and verify NTP as a client.

Configure and verify network device security features

• 7.1.a Device password security
• 7.1.b enable secret versus enable
• 7.1.c Transport
• 7.1.c.1 disable telnet
• 7.1.c.2 SSH
• 7.1.d VTYs
• 7.1.e physical security
• 7.1.f service password
• 7.1.g Describe external authentication methods
• 7.2 Configure and verify Switch Port Security
• 7.2.a Sticky mac
• 7.2.b MAC address limitation
• 7.2.c static/dynamic
• 7.2.d violation modes    
• â—¦7.2.d [i] err disable
• â—¦7.2.d [ii] shutdown
• â—¦7.2.d [iii] protect restrict
• 7.2.e shutdown unused ports
• 7.2.f err disable recovery
• 7.2.g assign unused ports in unused VLANs
• 7.2.h putting Native VLAN to other than VLAN 1
• 7.3 Configure and verify ACLs to filter network traffic

Identify different WAN technologies

• 8.1.a Metro ethernet
• 8.1.b VSAT
• 8.1.c Cellular 3g/4g
• 8.1.d MPLS
• 8.1.e T1/E1
• 8.1.f ISDN
• 8.1.g DSL
• 8.1.h Frame relay
• 8.1.i Cable
• 8.1.j VPN
• 8.2 Configure and verify a basic WAN serial connection
• 8.3 Configure and verify a PPP connection between Cisco routers
• 8.4 Configure and verify Frame Relay on Cisco routers 
• 8.5 Implement and troubleshoot PPPoE